ln_gateway::lightning::ldk

Struct GatewayLdkClient

Source
pub struct GatewayLdkClient {
    node: Arc<Node>,
    bitcoind_rpc: DynBitcoindRpc,
    task_group: TaskGroup,
    htlc_stream_receiver_or: Option<Receiver<InterceptPaymentRequest>>,
    outbound_lightning_payment_lock_pool: LockPool<PaymentId>,
}

Fields§

§node: Arc<Node>

The underlying lightning node.

§bitcoind_rpc: DynBitcoindRpc

The client for querying data about the blockchain.

§task_group: TaskGroup§htlc_stream_receiver_or: Option<Receiver<InterceptPaymentRequest>>

The HTLC stream, until it is taken by calling ILnRpcClient::route_htlcs.

§outbound_lightning_payment_lock_pool: LockPool<PaymentId>

Lock pool used to ensure that our implementation of ILnRpcClient::pay doesn’t allow for multiple simultaneous calls with the same invoice to execute in parallel. This helps ensure that the function is idempotent.

Implementations§

Source§

impl GatewayLdkClient

Source

pub fn new( data_dir: &Path, chain_source_config: GatewayLdkChainSourceConfig, network: Network, lightning_port: u16, mnemonic: Mnemonic, runtime: Arc<Runtime>, ) -> Result<Self>

Creates a new GatewayLdkClient instance and starts the underlying lightning node. All resources, including the lightning node, will be cleaned up when the returned GatewayLdkClient instance is dropped. There’s no need to manually stop the node.

Source

async fn handle_next_event( node: &Node, htlc_stream_sender: &Sender<InterceptPaymentRequest>, handle: &TaskHandle, )

Source

async fn outpoint_to_scid(&self, funding_txo: OutPoint) -> Result<u64>

Converts a transaction outpoint to a short channel ID by querying the blockchain.

Trait Implementations§

Source§

impl Debug for GatewayLdkClient

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Drop for GatewayLdkClient

Source§

fn drop(&mut self)

Executes the destructor for this type. Read more
Source§

impl ILnRpcClient for GatewayLdkClient

Source§

fn info<'life0, 'async_trait>( &'life0 self, ) -> Pin<Box<dyn Future<Output = Result<GetNodeInfoResponse, LightningRpcError>> + Send + 'async_trait>>
where Self: 'async_trait, 'life0: 'async_trait,

Returns high-level info about the lightning node.
Source§

fn routehints<'life0, 'async_trait>( &'life0 self, _num_route_hints: usize, ) -> Pin<Box<dyn Future<Output = Result<GetRouteHintsResponse, LightningRpcError>> + Send + 'async_trait>>
where Self: 'async_trait, 'life0: 'async_trait,

Returns route hints to the lightning node. Read more
Source§

fn pay<'life0, 'async_trait>( &'life0 self, invoice: Bolt11Invoice, max_delay: u64, max_fee: Amount, ) -> Pin<Box<dyn Future<Output = Result<PayInvoiceResponse, LightningRpcError>> + Send + 'async_trait>>
where Self: 'async_trait, 'life0: 'async_trait,

Attempts to pay an invoice using the lightning node, waiting for the payment to complete and returning the preimage. Read more
Source§

fn route_htlcs<'a, 'life0, 'async_trait>( self: Box<Self>, _task_group: &'life0 TaskGroup, ) -> Pin<Box<dyn Future<Output = Result<(RouteHtlcStream<'a>, Arc<dyn ILnRpcClient>), LightningRpcError>> + Send + 'async_trait>>
where Self: 'async_trait, 'a: 'async_trait, 'life0: 'async_trait,

Consumes the current client and returns a stream of intercepted HTLCs and a new client. complete_htlc must be called for all successfully intercepted HTLCs sent to the returned stream. Read more
Source§

fn complete_htlc<'life0, 'async_trait>( &'life0 self, htlc: InterceptPaymentResponse, ) -> Pin<Box<dyn Future<Output = Result<(), LightningRpcError>> + Send + 'async_trait>>
where Self: 'async_trait, 'life0: 'async_trait,

Completes an HTLC that was intercepted by the gateway. Must be called for all successfully intercepted HTLCs sent to the stream returned by route_htlcs.
Source§

fn create_invoice<'life0, 'async_trait>( &'life0 self, create_invoice_request: CreateInvoiceRequest, ) -> Pin<Box<dyn Future<Output = Result<CreateInvoiceResponse, LightningRpcError>> + Send + 'async_trait>>
where Self: 'async_trait, 'life0: 'async_trait,

Requests the lightning node to create an invoice. The presence of a payment hash in the CreateInvoiceRequest determines if the invoice is intended to be an ecash payment or a direct payment to this lightning node.
Source§

fn get_ln_onchain_address<'life0, 'async_trait>( &'life0 self, ) -> Pin<Box<dyn Future<Output = Result<GetLnOnchainAddressResponse, LightningRpcError>> + Send + 'async_trait>>
where Self: 'async_trait, 'life0: 'async_trait,

Gets a funding address belonging to the lightning node’s on-chain wallet.
Source§

fn send_onchain<'life0, 'async_trait>( &'life0 self, __arg1: SendOnchainPayload, ) -> Pin<Box<dyn Future<Output = Result<SendOnchainResponse, LightningRpcError>> + Send + 'async_trait>>
where Self: 'async_trait, 'life0: 'async_trait,

Executes an onchain transaction using the lightning node’s on-chain wallet.
Source§

fn open_channel<'life0, 'async_trait>( &'life0 self, __arg1: OpenChannelPayload, ) -> Pin<Box<dyn Future<Output = Result<OpenChannelResponse, LightningRpcError>> + Send + 'async_trait>>
where Self: 'async_trait, 'life0: 'async_trait,

Opens a channel with a peer lightning node.
Source§

fn close_channels_with_peer<'life0, 'async_trait>( &'life0 self, __arg1: CloseChannelsWithPeerPayload, ) -> Pin<Box<dyn Future<Output = Result<CloseChannelsWithPeerResponse, LightningRpcError>> + Send + 'async_trait>>
where Self: 'async_trait, 'life0: 'async_trait,

Closes all channels with a peer lightning node.
Source§

fn list_active_channels<'life0, 'async_trait>( &'life0 self, ) -> Pin<Box<dyn Future<Output = Result<ListActiveChannelsResponse, LightningRpcError>> + Send + 'async_trait>>
where Self: 'async_trait, 'life0: 'async_trait,

Lists the lightning node’s active channels with all peers.
Source§

fn get_balances<'life0, 'async_trait>( &'life0 self, ) -> Pin<Box<dyn Future<Output = Result<GetBalancesResponse, LightningRpcError>> + Send + 'async_trait>>
where Self: 'async_trait, 'life0: 'async_trait,

Returns a summary of the lightning node’s balance, including the onchain wallet, outbound liquidity, and inbound liquidity.
Source§

fn pay_private<'life0, 'async_trait>( &'life0 self, _invoice: PrunedInvoice, _max_delay: u64, _max_fee: Amount, ) -> Pin<Box<dyn Future<Output = Result<PayInvoiceResponse, LightningRpcError>> + Send + 'async_trait>>
where Self: 'async_trait, 'life0: 'async_trait,

Attempts to pay an invoice using the lightning node, waiting for the payment to complete and returning the preimage. Read more
Source§

fn supports_private_payments(&self) -> bool

Returns true if the lightning backend supports payments without full invoices. If this returns true, ILnRpcClient::pay_private must be implemented.

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> Downcast for T
where T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> FutureExt for T

§

fn with_context(self, otel_cx: Context) -> WithContext<Self>

Attaches the provided Context to this type, returning a WithContext wrapper. Read more
§

fn with_current_context(self) -> WithContext<Self>

Attaches the current Context to this type, returning a WithContext wrapper. Read more
§

impl<T> FutureExt for T

§

fn with_context(self, otel_cx: Context) -> WithContext<Self>

Attaches the provided Context to this type, returning a WithContext wrapper. Read more
§

fn with_current_context(self) -> WithContext<Self>

Attaches the current Context to this type, returning a WithContext wrapper. Read more
§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoRequest<T> for T

Source§

fn into_request(self) -> Request<T>

Wrap the input message T in a tonic::Request
Source§

impl<T> IntoRequest<T> for T

Source§

fn into_request(self) -> Request<T>

Wrap the input message T in a tonic::Request
§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

impl<T> ErasedDestructor for T
where T: 'static,

Source§

impl<T> MaybeSend for T
where T: Send,

§

impl<T> MaybeSend for T
where T: Send,

§

impl<T> MaybeSendSync for T

Source§

impl<T> MaybeSync for T
where T: Sync,